PK!£ÑN--custom_normal quality - jf1[general] version = 2 name = Normal Quality - jf1 definition = fdmprinter [metadata] quality_type = normal type = quality_changes [values] infill_pattern = grid material_diameter = 1.7 line_width = 0.45 speed_infill = 20.0 raft_airgap = 0.30625 material_flow = 100 infill_line_width = 0.4 layer_height = 0.13125 speed_travel = 150 material_bed_temperature = 30 adhesion_type = skirt retraction_speed = 40 material_print_temperature = 190 speed_print = 40 retraction_amount = 4.5 speed_layer_0 = 20 layer_height_0 = 0.30625 top_bottom_thickness = 0.65625 PK!£ÑN--custom_normal quality - jf1PKIf